Health assessment of emerging persistent organic pollutants (POPs) in PM2.5 in northern and central Taiwan.

Over the last two decades, Taiwan has effectively diminished atmospheric concentrations of polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) through the adept utilization of advanced technologies and the implementation of air pollution control devices. Despite this success, there exists a dearth of data regarding the levels of other PM2.5-bound organic pollutants and their associated health risks. To address this gap, our study comprehensively investigates the spatial and seasonal variations, potential sources, and health risks of PCDD/Fs, Polychlorinated biphenyls (PCBs), and Polychlorinated naphthalene (PCNs) in Northern and Central Taiwan. Sampling collections were conducted at three specific locations, including six municipal waste incinerators in Northern Taiwan, as well as a traffic and an industrial site in Central Taiwan. As a result, the highest mean values of PM2.5 (20.3-39.6 µg/m3) were observed at traffic sites, followed by industrial sites (14.4-39.3 µg/m3), and the vicinity of the municipal waste incinerator (12.4-29.4 µg/m3). Additionally, PCDD/Fs and PCBs exhibited discernible seasonal fluctuations, displaying higher concentrations in winter (7.53-11.9 and 0.09-0.12 fg I-TEQWHO/m3) and spring (7.02-13.7 and 0.11-0.16 fg I-TEQWHO/m3) compared to summer and autumn. Conversely, PCNs displayed no significant seasonal variations, with peak values observed in winter (0.05-0.10 fg I-TEQWHO/m3) and spring (0.03-0.08 fg I-TEQWHO/m3). Utilizing a Positive Matrix Factorization (PMF) model, sintering plants emerged as the predominant contributors to PCDD/Fs, constituting 77.9% of emissions. Woodchip boilers (68.3%) and municipal waste incinerators (21.0%) were identified as primary contributors to PCBs, while municipal waste incinerators (64.6%) along with a secondary copper and a copper sludge smelter (22.1%) were the principal sources of PCNs. Moreover, the study specified that individuals aged 19-70 in Northern Taiwan and those under the age of 12 years in Central Taiwan were found to have a significantly higher cancer risk, with values ranging from 9.26 x 10-9-1.12 x 10-7 and from 2.50 x 10-8-2.08 x 10-7respectively.

Short- and medium-chain chlorinated paraffins in breast milk in Shanghai, China: Occurrence, characteristics, and risk assessment.

As novel contaminants, short-chain chlorinated paraffins (SCCPs) and medium-chain chlorinated paraffins (MCCPs) have been of great concern in the past several years. Shanghai was one of the provinces with the largest chlorinated paraffins (CPs) emission in China; nevertheless, there is currently little information on the human exposure to SCCPs and MCCPs, particularly MCCPs. In this study, 25 breast milk samples were collected in Shanghai from 2016 to 2017. The concentrations of SCCPs and MCCPs were determined using two-dimensional gas chromatography coupled with orbitrap high-resolution mass spectrometry (GC × GC-orbitrap-HRMS) to investigate their characteristics and assess the associated health risks for breast-fed infants. Compared with the previous studies in other areas, the current study presented the higher CPs concentrations, with median concentrations of SCCPs and MCCPs up to 771 and 125 ng/g lipid weight (lw), respectively. The exposure profiles of the CPs were characterized by C10 and Cl6-7 as the predominant congeners of SCCPs, while C14 and Cl7-9 were identified as the dominant groups of MCCPs. CP-42 and CP-52 were identified as potential sources of CPs found in breast milk samples collected in Shanghai. The concentrations of MCCPs exhibited a positive correlation (p value < 0.05) with the dietary consumption of meat and poultry. No significant positive correlations were observed for SCCPs and MCCPs with polychlorinated dibenzodioxins/furans (PCDD/Fs) congeners. A preliminary exposure assessment showed that SCCPs in breast milk potentially posed high risks to the breast-fed infants in Shanghai.

Probabilistic human health risk assessment of PCDD/Fs near municipal solid-waste incinerator using Monte Carlo analysis coupled with triangular fuzzy numbers.

PCDD/Fs are dioxins produced by waste incineration and pose risks to human health. We aimed to detail the health risks of airborne and soil PCDD/Fs near a municipal solid-waste incinerator (MSWI) for the surrounding population and develop a new model that improves upon existing methods. Thus, we conducted field sampling and then investigated a MSWI in the Pearl River Delta (2016-2018). Our results showed that the carcinogenic and non-carcinogenic risk values of PCDD/Fs exposed to residents in nearby areas were acceptable, with hazard index (HI) values lower than 1.0 and a total carcinogenic risk lower than 1.0E-6. Notably, the results raised concerns regarding higher non-carcinogenic risks in children than in adults. Comparative analysis of the frequency accumulation diagram, accumulated probability risk, and the absolute value of error (δ) between the 95% confidence interval (CI) and the 90% CI of the Monte Carlo stochastic simulation-triangular fuzzy number (MCSS-TFN) and the MCSS model, respectively, demonstrated that the MCSS-TFN exhibited less uncertainty than the MCSS model, regardless of the health risk value of PCDD/Fs in ambient air or in soil. This observation underscores the superiority of the MCSS-TFN model over other models in assessing the health risks associated with PCDD/Fs in situations with limited data. Our new method overcomes the limited dataset size and high uncertainty in assessing the health risks of dioxin substances, providing a more comprehensive understanding of their associated health risks than MCSS models.

Human health risk assessment of volatile organic compounds in oil-based drill cuttings of shale gas.

Waste oil-based drill cuttings contain dioxins and volatile organic compounds (VOCs), which have the potential to cause serious health effects in humans. Therefore, this paper took oil-based drill cuttings (OBDCs) as the research object and carried out the testing of VOCs and dioxins content by using GC-MS and HRGCS-HRMS and comprehensively evaluated the content, composition and distribution pattern of VOCs and dioxins and the risk to human health posed by the two pollutants in OBDCs. The results showed that the VOCs did not exceed the emission limits in ESPPI (GB 31571-2015), but it is vital to recognise that 1,2-dichloropropane has the potential to cause cancer risk, with soil and groundwater risk control values of 662.95 mg·kg-1 and 0.066 mg·kg-1, respectively. Benzene, 1,2-dichloropropane and 8 other VOCs pose a non-carcinogenic risk to humans. The levels of polychlorinated dibenzofurans (PCDFs) exceeded those of polychlorinated dibenzo-p-dioxins (PCDDs), which accounted for 95.76 percent of the total PCDD/Fs, 2,3,4,7,8-P5CDF (56.00%), 2,3,7,8-T4CDF (9.20%), 1,2,3,6,7,8-H6CDF (8.80%) and 1,2,3,7,8-P5CDF (8.00%) were the main contributing monomers. The findings of the assessment on exposure risk indicate that there is a respiratory risk to oil-based drill cuttings dioxins for adults and children exceeded the World Health Organisation (WHO) acceptable daily intake (ADI) (1-4 pgTEQ/kg/d). Finally, three aspects of solid waste pre-treatment prior to incineration, the incineration process and post incineration were used to reduce the environmental and human health risks from dioxins.

Results of an international interlaboratory study on dioxin-like activities in drinking-, river surface- and wastewater using DR CALUX bioassay.

Aquatic animals and consumers of aquatic animals are exposed to increasingly complex mixtures of known and as-yet-unknown chemicals with dioxin-like toxicities in the water cycle. Effect- and cell-based bioanalysis can cover known and yet unknown dioxin and dioxin-like compounds as well as complex mixtures thereof but need to be standardized and integrated into international guidelines for environmental testing. In an international laboratory testing (ILT) following ISO/CD 24295 as standard procedure for rat cell-based DR CALUX un-spiked and spiked extracts of drinking-, surface-, and wastewater were validated to generate precision data for the development of the full ISO-standard. We found acceptable repeatability and reproducibility ranges below 36 % by DR CALUX bioassay for the tested un-spiked and spiked water of different origins. The presence of 17 PCDD/Fs and 12 dioxin-like PCBs was also confirmed by congener-specific GC-HRMS analysis. We compared the sum of dioxin-like activity levels measured by DR CALUX bioassay (expressed in 2,3,7,8-TCDD Bioanalytical Equivalents, BEQ; ISO 23196, 2022) with the obtained GC-HRMS chemical analysis results converted to toxic equivalents (TEQ; van den Berg et al., 2013).

Distributions of PCDD/Fs, PCBs, and PCNs in coastal sediments collected from major industrial bays in South Korea.

Polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs), polychlorinated biphenyls (PCBs), and polychlorinated naphthalenes (PCNs) were assessed in coastal sediments from industrial bays in South Korea to evaluate the pollution levels and their environmental impact. The mean sediment concentrations of Σ17 PCDD/Fs, Σ18 PCBs, and Σ15 PCNs were 198 ± 140, 3427 ± 7037, and 85 ± 336 pg/g dw, respectively. Generally, pollutant concentrations in the inner bay were higher than those in the outer bay, indicating the influence of industrial emissions and harbor activities. The primary sources were identified as steel manufacturing and wastewater treatment plants for PCDD/Fs, harbor and shipbuilding activities for PCBs, and combustion-related sources for PCNs. Notably, PCDD/F concentrations exceeded sediment guideline values. The combined effects of PCDD/Fs and PCBs demonstrated adverse impacts on aquatic organisms. Hence, the release of toxic pollutants into the marine environment could have potential biological effects due to the combined impact of these various compounds.

Polychlorinated dibenzodioxins/furans and dioxin-like polychlorinated biphenyls in fish and crustaceans of a recreationally fished estuary, following targeted remediation.

Polychlorinated dibenzo-p-dioxins and furans (PCDD/Fs) and dioxin-like polychlorinated biphenyls (dl-PCBs) are a suite of harmful chemicals (hereafter collectively referred to as 'dioxins'), and their emission into aquatic habitats leads to persistent contamination of sediments, aquatic food-webs, and seafoods. Quantifying contaminant levels in seafood species is important for the ongoing management of exposure risk by fishers, particularly after any remediation actions. We present dioxin concentrations in four seafood species (Yellowfin Bream Acanthopagrus australis, Sea Mullet Mugil cephalus, Eastern School Prawn Metapenaeus macleayi, and Eastern King Prawn Penaeus plebejus) in a recreationally fished estuary, in relation to a contaminated site that has undergone a remediation process, partially removing contaminated sediments (Homebush Bay, Port Jackson, New South Wales, Australia). Dioxin concentrations in these species were measured before (2005/6) and after (2015/16) remediation at a range of locations in and around the remediated site. Dioxin concentrations and congener profiles differed substantially among taxa, and concentrations were frequently higher than Australian screening criteria. The two prawn species showed evidence of a decline in dioxin concentrations after remediation, but the fish species only showed a declining dioxin concentration with distance from the contaminated site (not between periods). There were some minor changes in the congener profile for some species following remediation. While there was evidence for greatly reduced dioxin concentrations in prawn species following remediation, the complex patterns for fish were likely affected by environmental changes, species-specific and temporal changes in lipid content, and animal movement patterns. Future monitoring may aid interpretation of the patterns and modelling of exposure risk associated with seafood consumption into the future.

Dibenzofurans from nature: Biosynthesis, structural diversity, sources, and bioactivities.

Dibenzofurans are a small class of natural products with versatile biological activities that used to be thought to come mainly from lichens and ascomycetes. In fact, they are also distributed widely in higher plants, especially in the families Rosaceae and Myrtaceae. Dibenzofurans and derivatives from lichens and ascomycetes have been well reviewed, but dibenzofurans from all biological sources in nature have not been reviewed. In this review, dibenzofurans from all natural sources have been comprehensively reviewed, and a total of 211 dibenzofurans isolated and identified from organisms between 1843 and March 2023 are categorized and discussed, including their biosynthesis, structural diversity, sources, and bioactivities.

Dioxins and furans maternal transfer: A study of breast milk and cord serum levels among Lebanese mothers and associations with newborn anthropometric measurements.

Dioxins and furans (PCDD/Fs) are anthropogenic pollutants that persist in the environment for long years, bioaccumulating in food & contaminating humans. In pregnancy, they can transfer through the placenta and reach the fetus, which negatively affects fetal growth. They can also reach newborns through breastfeeding. In this study, we focused on this critical subpopulation and identified the presence of PCDD/Fs among pregnant women in breast milk (n = 41) and cord serum (n = 49); we assessed the correlation between different matrices, evaluated the predictors and associations with newborn anthropometric measurements. Over 70.7 % of PCDD/Fs were detected in breast milk and 46.9-55.1 % in cord serum. Cord/maternal serum and breast milk to maternal serum ratios were > 1 with a significant positive Spearman correlation (0.669-0.729). Breast milk & maternal serum PCDD/Fs were associated inversely with age and positively with red meat intake. Cord serum PCDD/Fs were inversely associated with pre-pregnancy weight loss and passive smoking. Parity and gestational weight gain showed positive associations with Z-scores at birth. Z-score differences showed negative and positive associations with passive smoking and pre-pregnancy BMI respectively.

Levels, patterns and risk assessment of PCDD/Fs and dl-PCBs through dietary exposure in the Valencian Region (Spain).

Polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) and dioxin like polychlorinated biphenyls (dl-PCBs) levels were measured in representative vegetable oils and animal origin foodstuffs collected in a Total Diet Study carried out in the Valencian Region (Spain). A total amount of 3,300 food samples were collected and grouped into 5 main food groups: vegetable oils, meat and meat products, eggs, milk and dairy products and fish and sea products. The samples were analysed using gas chromatography coupled to high-resolution mass spectrometry (GC-HRMS). The food group which presented the highest concentration in wet weight (ww) for the sum of PCDD/Fs and dl-PCBs was fish and sea products (0.5 pg TEQ g-1 ww), whereas meat and meat products (0.6 pg TEQ g-1 lipid) showed the highest levels expressed in lipid terms. Occurrence data of PCDD/F and dl-PCBs were combined with consumption data to estimate the dietary exposure of adults (>15 years) and children (6-15 years). Finally, the estimated weekly intake (EWI) was calculated using a deterministic approach and considering the food consumption of the population, with fish and sea products being the main food group contributor. Likewise, considering the worst-case scenario (Upper Bound, UB), average EWI were 1.8 and 3.4 pg TEQ kg-1 body weight (bw) week-1 for adults and children, respectively. For children, the average EWI was almost twice above the tolerable weekly intake (TWI) of 2 pg TEQ kg-1 bw week-1 set by EFSA in 2018. In terms of risk characterisation, the overall obtained results showed that 19 % of adults and 43 % of children may exceed the TWI when using UB.

Polychlorinated Naphthalenes in Foods from the French Market: Occurrence, Dietary Exposure, and Evaluation of Relative Contributions to Dioxin-like Contaminants.

Despite the growing interest in PCNs and the dioxin-like toxicity exhibited by a number of congeners, a comprehensive assessment of their contribution to the cocktail of dioxin-like contaminants is still lacking. To address such a shortcoming, this study investigated the PCN contamination in foodstuffs recently acquired in France, together with that of the regulatory polychlorinated dibenzodioxins/furans (PCDD/Fs) and polychlorinated biphenyls (PCBs). PCNs were ubiquitous at levels (∑70 PCNs = 2.5-150 pg g-1 wet weight) similar to those reported in other countries, with maximum concentrations observed in fish and fishery products from the North-East Atlantic Ocean. Their congener patterns further suggested unintentional releases of PCNs, while those of the other foodstuffs were correlated to the historical PCN profiles. Low risk from dietary exposure was estimated (∑70 PCNs-EDIs of 60-360 pg kg-1 bw d-1, ∑24 PCNs-TEQ-EDIs of 8 × 10-3-2.2 × 10-2 pg TEQ kg-1 bw d-1), with milk and dairy products being the highest contributors, followed by meat and meat products. Finally, the rather high contributions of PCNs to the total PCNs+PCDD/Fs+PCBs concentrations (0.9-50%, average of 9%) and the toxic equivalents (0.2-24%, average of 5%) show that these substances are not minor components of the PCNs+PCDD/Fs+PCBs cocktail.

Distribution of PCDD/Fs and PCBs at different locations in a circulating fluidised bed municipal solid waste incinerator.

This study investigates a circulating fluidised bed (CFB) incineration plant to examine the concentrations and fingerprints of polychlorinated dibenzo-p-dioxins (PCDDs), dibenzofurans (PCDFs), and biphenyls (PCBs) at five locations downstream of the post-combustion zone. Sampling encompassed both flue gas and ash, spanning from the high-temperature superheater to the outlet of the baghouse filter, thus covering a wide range of flue gas temperatures. The analysis reveals a continuous increase in PCDD/F and PCB concentrations in the flue gas from the superheater to the inlet of the air pollution control system (APCS). The maximum concentrations observed were 75.8 ng/Nm3 for PCDDs, 219 ng/Nm3 for PCDFs, and 763 ng/Nm3 for PCBs. These values represent 9.14, 11.5, and 6.37 times their respective concentrations at the outlet of the high-temperature superheater. Concurrently, the levels of PCDD/Fs and dioxin-like PCBs (dl-PCBs) in the ash steadily increased along the cooling path of the flue gas within the plant. Comparing dl-PCBs to the total amount of 209 PCB congeners, it was evident that dl-PCBs exhibited a trend more akin to that of PCDD/Fs. A robust linear correlation was observed between dl-PCBs and PCDD/Fs (R2 = 0.99, p < 0.001), surpassing that between PCBs and PCDD/Fs (R2 = 0.92, p < 0.01), suggesting that dl-PCBs share closer formation pathways with PCDD/Fs. Additionally, elemental composition analysis of fly ash samples aimed to explore potential links between fly ash characteristics and PCDD/F and PCB formation. The Cl/S ratio increased from 1.58 to 5.13 with decreasing flue gas temperature. Principal component analysis (PCA) was employed to visualise the concentrations of PCDD/Fs and PCBs in the flue gas alongside elemental contents in the fly ash. With the exception of PCBs in ash, all other PCDD/Fs and PCBs in fly ash exhibited positive correlations with both carbon (C) and chlorine (Cl). Furthermore, a positive relationship between C/Cl and PCDD/Fs-PCBs in fly ash implies that fly ash serves as the primary reaction surface for dioxin generation during low-temperature heterogeneous catalytic reactions.

Ensuring safety standards in sewage sludge-derived biochar: Impact of pyrolysis process temperature and carrier gas on micropollutant removal.

The application of sewage sludge to agricultural land is facing increasing restrictions due to concerns about various micropollutants, including polycyclic aromatic hydrocarbons (PAHs), dioxins and furans (PCDD/Fs), polychlorinated biphenyls (PCBs), per- and poly-fluoroalkyl substances (PFAS), and heavy metals (HMs). As an alternative approach to manage this residue, the use of pyrolysis, a process that transforms sludge into biochar, a carbon-rich solid material, is being explored. Despite the potential benefits of pyrolysis, there is limited data on its effectiveness in removing micropollutants and the potential presence of harmful elements in the resulting biochar. This study aims to evaluate the impact of the temperature and the use of a carrier gas (N2) during a two-stage pyrolysis and cooling on micropollutant removal. Pilot-scale tests showed that a higher temperature (650 °C) and the use of a carrier gas (0.4 L/min N2) during the pyrolysis and the cooling process led to a reduction of PAHs, PCDD/Fs, PCBs and PFAS below their detection limits. As such, the generated biochar aligns with the guidelines set by the International Biochar Initiative (IBI) and the European Biochar Certificate (EBC) for all micropollutants, except for zinc and copper. Additional investigation is required to determine whether the micropollutants undergo destruction or transition into other pyrolysis end-products, such as the gas or liquid phase.

The 2022 world health organization reevaluation of human and mammalian toxic equivalency factors for polychlorinated dioxins, dibenzofurans and biphenyls.

In October 2022, the World Health Organization (WHO) convened an expert panel in Lisbon, Portugal in which the 2005 WHO TEFs for chlorinated dioxin-like compounds were reevaluated. In contrast to earlier panels that employed expert judgement and consensus-based assignment of TEF values, the present effort employed an update to the 2006 REP database, a consensus-based weighting scheme, a Bayesian dose response modeling and meta-analysis to derive "Best-Estimate" TEFs. The updated database contains almost double the number of datasets from the earlier version and includes metadata that informs the weighting scheme. The Bayesian analysis of this dataset results in an unbiased quantitative assessment of the congener-specific potencies with uncertainty estimates. The "Best-Estimate" TEF derived from the model was used to assign 2022 WHO-TEFs for almost all congeners and these values were not rounded to half-logs as was done previously. The exception was for the mono-ortho PCBs, for which the panel agreed to retain their 2005 WHO-TEFs due to limited and heterogenous data available for these compounds. Applying these new TEFs to a limited set of dioxin-like chemical concentrations measured in human milk and seafood indicates that the total toxic equivalents will tend to be lower than when using the 2005 TEFs.

Occurrence, physicochemical properties and environmental behavior of polychlorinated dibenzothiophenes: A comprehensive review and future perspectives.

Polychlorinated dibenzothiophenes (PCDTs) are a form of emerging pollutant that has attracted great attention due to their structural resemblance to dioxins, which cast detrimental influence on the ecosystem and human health. This review shows the current status of research on PCDTs, focusing on their environmental occurrence, physicochemical properties, environmental behavior, and toxicity. Studies have suggested that the steps leading to the formation of PCDTs resemble those generating polychlorinated dibenzo-p-dioxin/dibenzofurans (PCDD/Fs), indicating their probable origin from the same sources. Furthermore, they may undergo a dechlorination process as a result of their photodegradation in the environment and metabolic reaction occurring within organisms, which could result in the conversion of these substances into additional pollutants like dibenzothiophene. PCDTs exist widely in the environmental media and have high logKOW values (>4.0), indicating their tendency to bioaccumulate. Moreover, the prediction results of EPI (Estimation Program Interface) Suite demonstrated a strong accumulation capacity for tetra-CDTs in fish compared to other chlorinated PCDTs. The biotransformation half-life of PCDTs would prolong with an increasing number of substituted Cl atoms in fish. A limited number of studies have also suggested that PCDTs can cause damage to the liver and immune system in living organisms, and the toxicity of PCDTs depends on the number and position of substituted Cl atoms. Future studies should be conducted on processes causing PCDT toxicity as well as their behavior and fate in actual environments.

Characteristics of the pyrolytic products and the pollutant emissions at different operating stages from a pilot waste tire pyrolysis furnace.

Pyrolysis is considered a highly practical, cost-effective, and environment-friendly technology for waste tires disposal. In this study, pyrolysis processes of waste tires were conducted in a pilot scale furnace feeding at 30 kg/h. The properties of pyrolytic products and the distribution patterns of pollutants generated in different operating stages (start-up, steady, and shut-down) were investigated. The pyrolytic gas in the steady state had a high caloric value of 10799 kJ/Nm3, valuable as heating source for pyrolysis. The elements of sulfur and zinc were effectively fixed as ZnS in the pyrolytic carbon. The basic properties of pyrolytic oil were in line with commercial diesel oil except for the lower flash point. Heavy metals were mainly concentrated in the pyrolytic carbon, with slightly higher concentrations in the steady state. Moreover, polycyclic aromatic hydrocarbons (PAHs) and polychlorinated dibenzo-p-dioxins and dibenzofurans (PCDD/Fs) were mainly concentrated in the pyrolytic oil, with predominated low-ring PAHs and high chlorinated PCDD/Fs. The concentrations of PAHs and PCDD/Fs in the gas phase were higher during the start-up stage due to the memory effect, whereas were effectively reduced during the steady stage. The concentration of PAHs in the solid phase was highest during the furnace start-up and lowest in the shut-down stage. In contrast to PAHs, the PCDD/Fs in the solid phase reached their highest concentration during the shut-down stage, which was mainly affected by temperature. The results provide guidance for the reducing of pollutant emissions and the recycling of pyrolytic products.

Micropollutants in biochar produced from sewage sludge: A systematic review on the impact of pyrolysis operating conditions.

Biochar obtained from sewage sludge serves as a valuable soil amendment in agriculture, enhancing soil properties by increasing the nutrient content, cation exchange capacity, water retention, and oxygen transmission. However, its utilisation is hampered by the presence of micropollutants such as polycyclic aromatic hydrocarbons (PAHs), polychlorinated dibenzodioxins (PCDDs), polychlorinated dibenzofurans (PCDFs), polychlorinated biphenyls (PCBs), and volatile organic compounds (VOCs). Previous studies indicate that the type and amount of micropollutants can be significantly adjusted by selecting the right process parameters. This literature review provides an overview of how (1) pyrolysis temperature, (2) carrier gas flow and type, (3) heating rate, and (4) residence time affect the concentration of micropollutants in biochar produced from sewage sludge. The micropollutants targeted are those listed by the European Biochar Certificate (EBC) and by the International Biochar Institution (IBI), including PAHs, PCDD/Fs, PCBs and VOCs. In addition, per- and poly-fluoroalkyl substances (PFAS) are also considered due to their presence in sewage sludge. The findings suggest that higher pyrolysis temperatures reduce micropollutant levels. Moreover, the injection of a carrier gas (N2 or CO2) during the pyrolysis and cooling processes effectively lowers PAHs and PCDD/Fs, by reducing the contact of biochar with oxygen, which is crucial in mitigating micropollutants. Nevertheless, limited available data impedes an assessment of the impact of these parameters on PFAS in biochar. In addition, further research is essential to understand the effects of carrier gas type, heating rate, and residence time in order to determine the optimal pyrolysis process parameters for generating clean biochar.

Serum PCDD/F levels in metropolitan populations living near a municipal solid waste incinerator in Eastern China.

Ambient exposure to polychlorinated dibenzo-p-dioxins/furans (PCDD/Fs) is suspected to cause adverse human health outcomes. Herein, serum samples from 40 residents in the neighborhood of a municipal solid waste incinerator (MSWI) in the metropolitan area were measured for PCDD/Fs. The mean toxic equivalent (TEQ) concentration of total PCDD/Fs in human serum samples was 16.8 pg TEQ/g lipid. Serum PCDD/F levels were significantly higher in residents adjacent to the MSWI than in those from areas far from the emission source (p < 0.01). In addition, there were no significant associations between serum PCDD/Fs levels and factors, such as gender, age, and BMI in donors. For non-occupationally exposed populations, OCDD and 1,2,3,7,8-PeCDD in serum are available as indicators of total PCDD/Fs and total TEQ, respectively. The atmospheric PCDD/Fs levels were within a relatively low range in areas upwind and downwind of the MSWI. The results of the principal component analysis showed a distinct difference in PCDD/F congener patterns between air and serum samples, suggesting inhalation exposure could have a limited influence on the human body burden. Our findings will deepen the current knowledge of endogenous PCDD/F exposure in urban populations, and also facilitate public health protection strategies near MSWIs.

Impacts of perinatal dioxin exposure on gaze behavior in 2-year-old children in the largest dioxin-contaminated area in Vietnam.

Fifty-five children aged 2 years from a birth cohort in the largest dioxin-contaminated area in Bien Hoa city, Vietnam participated in this survey to examine gaze behavior. Exposure levels were indicated by 2,3,7,8-tetrachlorodibenzo-p-dibenzodioxin (TCDD) and toxic equivalent of polychlorinated dibenzo-p-dioxin and polychlorinated dibenzofuran (TEQ-PCDD/Fs) levels in maternal breast milk. The percentage of the total fixation duration on the face (% Face), mouth (% Mouth), and eye areas (% Eyes) when viewing silent and conversation scenes was used as gaze behavior indices. When they reached 3-year-old, autistic behavior was assessed using the Autism Spectrum Rating Scale (ASRS). A general linear model adjusted for confounding factors was used to compare gaze indices and ASRS scores between high and low dioxin exposure groups. Effects of perinatal dioxin exposure on gaze behavior were found only when viewing conversation scenes indicated by lower % Face for boys in high TCDD exposure group and lower % Eyes for girls in high TEQ-PCDD/Fs group. Increased autistic traits showed by higher ASRS scores at 3-year-old were found in both gender in the high TCDD exposure group. These findings indicate that perinatal TCDD and TEQ-PCDD/Fs exposure may reduce gaze behavior in 2-year-old children, predicting increased autistic traits at 3-year-old.

Low-temperature catalytic oxidation of PCDD/Fs over MnCeCoOx/PPS catalytic filter.

Catalytic destruction of nitrogen oxides (NOx) combined with dust removal technique has attracted much attention, yet the application in the solid waste incineration air pollution control process is still lacking due to the complex flue gas atmosphere. In this work, the Mn-Ce-Co-Ox catalyst-coated polyphenylene sulfide (PPS) filter fiber with efficient dust removal and low-temperature polychlorinated dibenzo-p-dioxins and polychlorinated dibenzofurans (PCDD/Fs) destruction has been prepared with a redox-precipitation method. The catalyst was uniformly grown around the PPS fiber with appropriate catalyst loading. The effects of several key operating parameters (e.g., reaction temperature, catalyst loading amount, and filtration velocity) on the catalytic efficiency were comprehensively investigated. The results show that the Mn-Ce-Co-Ox/PPS has a decomposition yield of 78.0% in PCDD/Fs and 96% in nitric oxide (NO) conversion at 200 °C. The poisoned catalytic filter exhibits a removal efficiency of 88.6% for PCDD/Fs. In addition, the catalytic filter can completely reject particles smaller than 1.0 µm with a low filtration resistance. Therefore, this efficient and energy-conserving catalytic filter shows promising applications in flue gas pollution treatments.